HomeClassifiedseFLYEREventsFraudTestimonialsPost AdSearch AdsHelpMy Hangar











Experimental / Bede

2 BEDE-5 KITS WITH ENGINE • $3,995 • SOLD!! THANKS TO BARNSTORMERS This is 2 Bede5 kits in partial construction. 1 has A wings mostly built with the other has all the materials to build the B wings. some landing gear parts are made. with Polaris XLT 600cc 75hp engine that has fresh Wiesco top end. I have too many projects. You can build one and have lots of spare parts. • Contact David R. Dantonio, Owner - located WICHITA FALLS, TX USA • Telephone: 9407046553 . • Posted January 9, 2017 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AdView Larger Pictures





METAL BD-4 WINGSWANTED Looking for a complete set of BD-4 metal wings. Please email me with what you have. • Contact Jonathan W. Cook, End User - located Sherwood Park, AB Canada • Telephone: 780-966-0265 . • Posted January 5, 2017 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This Ad


BD 4 TAIL DRAGGERACCEPTING OFFERS BD 4 Plans built. Controls installed. You provide power plant ≥ 150 HP, instruments, interior, paint. sweat equity & you will have an already built Bede BD 4: economical & stable 4 place (or 2 place and haul a load of gear)140 mph airplane. Great Bede support available out of Florida to help you complete her. Call me and make an offer. Thanks Mac 619 792 4968 • Contact Merrell J. McMasters, Owner - located Chula Vista, CA USA • Telephone: 6197924968 • Posted January 4, 2017 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AdView Larger Pictures





EXCELLENT BD-5 PROJECT • $8,800 • PROJECT FOR SALE Best BD-5 Project available! Great condition. Assemblies done needs assembled. Much BD Micro jig drilled with BD Micro kit parts. Main spar & gear professionally aligned, drilled, & assembled. Electric flaps and trim. Also includes the rare "must-have" Jerry Kauth drive system. Includes all hard-to-get plans and parts such as gear door pans. Fuselage, wings, tail and sub-assemblies are ready for closure, finishing, and installation. Never registered - so you can register it and get your repairman's certificate. It has the same dangerous "A" wings as the World Record BD-5A. • Contact John M. Twigg, Owner - located Pittsburgh, PA USA • Telephone: 4127957006 • Posted December 30, 2016 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AdView Larger Pictures





BD-5 WITH INJECTED HONDA TURBO • $25,000 • AVAILABLE FOR SALE BD-5B (Stretch) with a fuel injected 1.2L Honda Turbo and a Kauth final drive system. A rare BARN FIND !!! This BD5 is totally complete, (airframe, engine, drive system, instruments and avionics), is CDN registered and has logged just a few test flights. Like many projects, it took a longer to finish than expected, and when it was ready to fly, the pilot felt he was just too old to safely fly it. The builder sold it to a 'would be flyer' where it was stored in his heated garage for 12/yrs. This project will require a complete inspection and ground running before taking to air once again. • Contact Gerry Barton - PM SPORT FLYERS, Owner - located West Vancouver, BC Canada • Telephone: 604.657.7057 . 360.612.2219 . • Posted December 21, 2016 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AdView Larger Pictures





BD-5J IN ARF KIT, FAST BUILD • $35,000 • AVAILABLE FOR SALE BD-5J in ARF kit. If you have ever wanted a BD5 JET, here is your chance to buy one that is built to the 'Fast Build' stage. The stretch fuselage is on gear, and tail feathers were factory built by BD-Micro, leaving only the wing to build (I have access to finished 17' ft jet wings). Package comes with a 'spare' BD-5B kit including all the extra parts that you might need to finish it. The exngine is a Noel Penny NPT-301 turbojet (300/lbs thrust) 'Non-Drone' that was used on the CMC Leopard exec 4/pl jet built in the UK, and is mounted to a Go-Kart frame so you can see, hear & run the engine. • Contact Gerry Barton - PM SPORT FLYERS, Owner - located West Vancouver, BC Canada • Telephone: 604.657.7057 . 360.612.2219 . • Posted December 21, 2016 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AdView Larger Pictures





BEDE STRUTACCEPTING OFFERS New Bede Strut with out a box. P/N A-1490 Bede P/N MBD5LG72 • Contact Alvaro M. Escamilla, Friend of Owner - located San Diego, CA USA • Telephone: 6195875067 . • Posted December 20, 2016 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This Ad


BEDE FORK AND FRONT WHEELACCEPTING OFFERS Bede Fork with front wheel. they are brand new. • Contact Alvaro M. Escamilla, Friend of Owner - located San Diego, CA USA • Telephone: 6195875067 . • Posted December 20, 2016 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This Ad


BEDE 4 WITH 180 HP LYCFOR SALE BY BUILDER Fuselage on gear with a 180 hp. LYC, wings with alum skins, flaps, ailerons, elevator, rudder & cowl are built. The engine log shows 751 hrs. since new. The cabin has seat tracks and seats from a Mooney. This project needs a larger work space to fit the wings and control surfaces to the fuselage. MAKE AN OFFER • Contact Larry A. Lux, Owner - located Bloomington, IN USA • Telephone: 812-332-9020 • Posted November 10, 2016 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AdView Larger Pictures





Browse Some More Listings...


HomeClassifiedseFLYEREventsFraudTestimonialsPost AdSearch AdsHelpMy Hangar





Registered Copyright © 1995-2017 barnstormers.com All Rights Reserved.
Legal Notices

Privacy Policy