Kit Planes / Velocity
1997 VELOCITY SE RG ACCEPTING OFFERS Due to overwhelming demand & the significant amount of money we have invested in this plane I am re-listing this AS IS Velocity aircraft (Hobbs Meter of 289.6) by opening it up to bid for 48 hour period which ends Sat Dec 20 at 4pm at which time I will review bids & contact the highest one & continue down the offers until a transaction is completed. To date the highest offer is $40,000 US dollars via Bank Check plus 6% Florida Sales tax. Plane hangared at Merritt Island Airport in Florida. See Display/Specs for more details, overhauled engine invoice, etc. Owner no longer able to fly. Contact Glenda Busick - AMERICAN INGENUITY, Owner - located Rockledge, FL USA Telephone: 321-693-8787 . 321-639-8777 . Posted December 18, 2014 Display Specs Page Show all Ads posted by this Advertiser Recommend This Ad to a Friend Email Advertiser Save to Watchlist Report This Ad View Larger Pictures
LOW TIME COZY MK IV $80,199 NEW TO MARKET I have a Cozy MK-IV completed 08/06. It currently has 740TTSN airframe and engine. It has a ECI TMX-360 built by Mattituck. With a Catto three bladed prop, re-finished DEC2012 by Catto. The engine includes SilverHawk fuel injection, and one Plazma III electronic ignition. The panel includes a Dynon 10A with remote compass, and a Dynon EMS-10. I also have certified airspeed, altimeter and turn and bank. Radio package is a Garmin GNS430, GMA340 audio panel, and GTX327 transponder. Also has a TRIO autopilot and altitude hold. Fresh annual and IFR check complete 09/14. 7GPH at 165 KTAS.CFI owned Contact Bryan Brooks, Owner - located Manhattan, KS USA Telephone: 3158041396 . Posted December 13, 2014 Show all Ads posted by this Advertiser Recommend This Ad to a Friend Email Advertiser Save to Watchlist Report This Ad View Larger Pictures
VELOCITY XL RG KIT $28,000 AVAILABLE FOR SALE OR TRADE Velocity XL RG Kit for sale or trade.This kit, is valued at $56k from Velocity and I am selling it for .50c on the dollar.Canard has been skinned and looks good. The previous owner did not do too much work.Around $100 of the AN Hardware is rusted. The wing skin doesn't look that great in my personal opinion and at worse, it will cost $6500 for new wing cores if you salvage the spars. Any Canard expert can cut new wing cores for a fraction of the cost.I personally think the wings are salvageable with a little filling. XL=Extra Large, Cleveland W&B, RG. Factory will support for small fee. Contact Robert L. Enfield, Owner - located Olive Branch, MS USA Telephone: 901-279-5054 . Posted December 9, 2014 Show all Ads posted by this Advertiser Recommend This Ad to a Friend Email Advertiser Save to Watchlist Report This Ad View Larger Pictures
Registered Copyright © 1995-2014 barnstormers.com All Rights Reserved.