HomeClassifiedseFLYEREventsFraudTestimonialsPost AdSearch AdsHelpMy Hangar











Projects Only / Biplane

PITTS S1CMUST SELL PITTS S1C project. so some one will get a great project. basic email for photos • Contact Kenneth D. Baba, Owner - located Avondale, AZ USA • Telephone: 307-640-7408 • Posted June 20, 2015 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This Ad


1936 WACO YQC-6 PROJECTPROJECT FOR SALE Waco YQC-6 Custom Cabin Project. Last annual 1971. Total Time Airframe 1175 hrs. TT Engine Unknown. SMOH 201 hrs. Nice original airframe . Includes a second engine. Please call for project specifics, photos and additional information. $39.5K or best offer. • Contact Brian Meuser, Owner - located Santa Rosa, CA USA • Telephone: 707-477-1262 . 707-526-9014 • Posted June 18, 2015 • Display Specs Page Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AdView Larger Pictures





HATZ BANTAM LSA PROJECTFOR SALE For Sale Hatz Bantam project. Includes the CAD plans, fuselage, complete tailfeathers, complete landing gear and stamped ribs from Hangar10Aero. (See their site). Also includes complete set Matco brakes and wheels, all tubing, finished spars and much more. All items are new unless noted on inventory. Included are dated build photos. We are asking $16,500 or best offer. We also have a Jabiru 3300, new and uncrated for sale and engine mount, EIS and Sensenich prop for this motor. I will happily answer any questions you may have. Contact JACK GREINER 303-652-0676 or • Contact Russell Brockmann, Owner - located Longmont, CO USA • Telephone: 303 776 2579 • Posted June 18, 2015 • Display Inventory Page Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AdView Larger Pictures





EAA BIPLANE • $1,200 • AVAILABLE FOR SALE Was a flying airplane. Needs front section, landing gear and one wing. Has a complete set of stainless steel aerodynamic flying wires from Brunton's. Additional complete set of CNC fittings and brackets and plans. Good start for a cheap project with the tedious work done. • Contact Jeremy Williams - OAK SPRING FARM, Owner - located Hampden, ME USA • Telephone: 207-862-3827 • Fax: 207-862-3827 • Posted June 14, 2015 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AdView Larger Pictures





AERO SPORT II -- IN PROCESSMAKE OFFER Selling a Bi-Plane Aero Sport II that is in process of being built. The wings are completed (not wrapped). Fuselage all tig welded up and aluminum for wrapping the fuselage is included as well as landing gear and tons of miscellaneous parts for completion. Built from plans. No engine or prop. Best offer. Please contact me via phone or e-mail. Randy 608-346-1263 • Contact Randy Wagner, Owner - located Janesville, WI USA • Telephone: 608-346-1263 . • Posted June 9, 2015 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AdView Larger Pictures





Browse Some More Listings...


HomeClassifiedseFLYEREventsFraudTestimonialsPost AdSearch AdsHelpMy Hangar





Registered Copyright © 1995-2015 barnstormers.com All Rights Reserved.
Legal Notices

Privacy Policy